HOME > Milling Machines > Grinding Machine > 2550AH

Grinding Machine 2550AH
Description:

2550AH

SPECIFICATIONS
Model
Specification
2550AH
Working surface of table  
(mm)
250x500 (10"x20")
Max. table travel  
(mm)
270x550 (10.75"x20")
Max. surface ground  
(mm)
250x500 (10"x20")
Max. distance center of spindle to table
500mm (20")
Table speed    
5~25 m/min (200"-1000"/min)
Table guideway    
V & Flat way
Auto. Cross feed increment  
approx.
Manual 0.1mm~12mm
Rapid power cross feed approx.  
(mm/min)
Manual 900(46")[60Hz]
Cross feed
on hand wheel 		 
1 rev
1 gra
4 mm (0.2")
0.02 mm (0.001")
Rapid power head elevation
approx. [Option] 		 
60Hz 50Hz
550 mm/min (13"/min) [60Hz]
450 mm/min (11"/min) [50Hz]
Vertical feed
on hand wheel 		 
1 rev
1 gra
2 mm (0.05")
0.01 mm (0.0002")
Auto. Down feed [Option]    
0.001 mm~0.099 mm/Time (0.0001"~0.0999" /Time)
Wheel speed  
60Hz/50Hz
3500 R.P.M (60HZ)
/ 2900 R.P.M (50Hz)
Wheel dimension
   
180x13x31.75 mm (max. 200x20x31.75)
(7"x0.5"x1.25") (max.8"x0.75"x1.25")
Spindle motor    
2HP
Hydraulic pump motor    
1HP
Auto. Cross feed motor    
1/5HP
Rapid head elevation motor    
1/5 HP [Option]
Coolant motor    
1/8 HP [Option]
Sound pressure level    
below 78dB (A)
Machine net weight  
Kgs
1350 (2970 Lbs)
Packing Gross weight  
Kgs
1550 (3410 Lbs)
Machine Floor space  
mm

3250x2400 (128"x95")
Packing dimension (LxWxH)  
cm
212x146x200 (84"x58"x79")

With AD5 AUTO. Down Feed Vertical feed on hand wheel is 2mm(0.05")/rev. 0.005mm(0.0001")/gra.


M : M series are three axes by Manual
H : H series are longitudinal by Hydraulic, and cross feed & vertical axes are manual
AH : AH series are Auto. cross feed, longitudinal by hydraulic and vertical axis is manual
AHR : AHR series are Auto. cross feed, longitudinal by hydraulic and vertical axis travel is by AC servo motor.

* THE MANUFACTURER RESERVES THE RIGHT TO MODIFY THE DESIGN AND MECHANISM SPECIFICATIONS, ETC., WITHOUT PRIOR NOTICE.