|
Description:
618-2A HIGH PRECISION SURFACE GRINDERS
SPECIFICATIONS
|
618 2A |
| General Capacity |
Table size |
150x460mm(6x18) |
| Max. grinding length |
470mm(18-3/4) |
| Max. grinding width |
160mm(6-1/3) |
| Distance from table surface to spindle center |
400mm(15-3/4) |
| Standard mag chuck size |
150x460mm(6x18) |
| Longitudinal Movement |
Manual travel |
510mm(20) |
| Hydraulic traverse |
510mm(20) |
| Table speed (infi variable) |
3~25mm(1/8~1) |
| Cross Movement |
Manual travel |
180mm(7) |
| Hydraulic traverse |
170mm(6-1/2) |
| Auto increment feeds (2A&3A) |
1~10mm(1/16~1/3) |
| Handwheel per graduation |
0.02mm(0.0005) |
| Handwheel per revolution |
5mm(1/5) |
| Vertical Downfeed |
Rapid traverse (60C/50C)-3A |
280/240mm/min |
| Handwheel per graduation |
0.005mm(0.002) |
| Handwheel per revoltuion |
1mm(0.05) |
| Grinding Wheel |
Wheel size (dia x width x bore) |
205x16x32mm
(8x2/3x1-1/4) |
| Spindle speeds (60C/50C) |
3600/3000 rpm |
| Motors |
Spindle motor |
1.5HP |
| Cross feed motor (2A/3A) |
1/6HP |
| Elevating motor (3A) |
0.5HP |
| Hydraulic motor (1A/2A/3A) |
1HP |
| Weight |
Net (approx) |
885 kgs (1947 lbs) |
| Gross (approx) |
1015 kgs (2233 lbs) |
| Packing size |
Length x width x height |
1600x1150x1980mm
(63x45x78) |
|
| |
| NOTE: THE MANUFACTURER RESERVES RIGHT TO MODIFY THE DESIGN. SPECIFICATIOS MACHANISMS ETC, WITHOUT NOTICE. |
|
With AD5 AUTO. Down Feed Vertical feed on hand wheel is 2mm(0.05)/rev. 0.005mm(0.001)/gra.
M : M series are three axes Manual
H : H series are longitudinal by Hydraulic, and cross feed & vertical axes are manual
AH : AH series are Auto. cross feed & Hydraulic longitudinal, and vertical axis is manual
AHR : AHR series are Auto. cross feed & Hydraulic longitudinal, and vertical axis is Rapid feed
* THE MANUFACTURER RESERVES RIGHT TO MODIFY THE DESIGN SPECIFICATIONS MECHANISMS ETC., WITHOUT NOTICE.
|
