HOME > Milling Machines > Grinding Machine > DL3060AH

DL3060AH
Description:

DL3060AH

SPECIFICATIONS
Model
Specification
DL3060AH
Working surface of table  
(mm)
300x600(12x24)
Max. table travel  
(mm)
340x700(13x27)
Max. surface ground  
(mm)
300x600(12x24)
Max. distance center of spindle to table
500mm(20) [Option-600mm(24)]
Table speed    
5~25 M/min (200~1000 /min)
Table guideway    
V & Flay way
Auto. Cross feed increment  
approx.
0.1mm~20mm (0.004~0.8)
Rapid power cross feed approx.  
(mm/min)
1100 mm/min (44 /min) [66Hz]
900 mm/min (36 /min) [50Hz]
Cross feed
on hand wheel 		 
1 rev
1 gra
5mm (0.2)
0.02mm (0.001)
Rapid power head elevation
approx. [Option] 		 
60Hz 50Hz
550 mm/min (13 /min) [60Hz]
450 mm/min (11 /min) [50Hz
Vertical feed
on hand wheel 		 
1 rev
1 gra
2mm(0.05)
0.005mm(0.0001)
Auto. Down feed [Option]    
0.001mm~0.099mm/Time (0.0001~0.0099 /Time) [Option]
Wheel speed  
60Hz/50Hz
1750 R.P.M(60Hz) / 1450 R.P.m(50Hz)
Wheel dimension
   
180x13x31.75mm(7x0.5x1.25)
355x38x127mm(14x1.5x5)
Spindle motor    
2HP(CS type) / 5HP (CL type)
Hydraulic pump mptor    
1HP
Auto. Cross feed motor    
1/5HP
Rapid head elevation motor    
1/5 HP [Option]
Coolant pump    
1/8 HP [Option]
Sound pressure level    
below 78dB (A)
Machine net weight  
Kgs
1700(3470 Lbs)
Packing Gross weight  
Kgs
1950(4290 Lbs)
Machine Floor space  
mm

3650x2550(144x100)
Packing dimension (LxWxH)  
cm
228x179x210
(90x71x83)

With AD5 AUTO. Down Feed Vertical feed on hand wheel is 2mm(0.05)/rev. 0.005mm(0.001)/gra.


M : M series are three axes Manual
H : H series are longitudinal by Hydraulic, and cross feed & vertical axes are manual
AH : AH series are Auto. cross feed & Hydraulic longitudinal, and vertical axis is manual
AHR : AHR series are Auto. cross feed & Hydraulic longitudinal, and vertical axis is Rapid feed

* THE MANUFACTURER RESERVES RIGHT TO MODIFY THE DESIGN SPECIFICATIONS MECHANISMS ETC., WITHOUT NOTICE.