|
Description:
CP Crossrail Fixed Type Plano Miller
Special Accessory:
- Side milling head.
- 90° angle milling head.
- X,Y,Z-axis Digital readout.
- NC-control system.
Specification List
MODEL |
|
CP-1500 |
CP-1800 |
CP-2000 |
CP-2500 |
CP-3000 |
CP-3500 |
CP-4000 |
| Control System |
- |
Inverter |
Working Width (X Axis) |
mm |
2000-6000 |
3000-6000 |
3000-10000 |
4000-13000 |
Working Length (YAxis) |
mm |
1500 |
1800 |
2000 |
2500 |
3000 |
3500 |
4000 |
| Distance Between Table And The Saddle Under Y Axis |
mm |
650 |
| Distance Between Columns |
mm |
1700 |
2000 |
2200 |
2700 |
3200 |
3700 |
4200 |
| Table Size Width |
mm |
1200 |
1400 |
1600 |
2000 |
2500 |
3000 |
3500 |
| Table Size Length |
mm |
2000-6000 |
3000-6000 |
3000-10000 |
4000-13000 |
| T Slot |
mm |
〉22 〉24 〉28 |
| X Axis Rapid Feed |
mm/min |
6000 |
| Y Axis Rapid Feed |
mm/min |
2400 |
| Double V Slide Distance |
mm |
700 |
900 |
1100 |
1400 |
| Vertical Milling Head |
|
| Spindle Motor |
HP |
15 |
| Max. Cutter Dia. |
mm |
250 |
| Spindle Taper |
N.T./B.T. |
〉 N.T. No.50 〉 B.T. No.50 |
| Spindle End O.D |
mm |
128.57 |
*Design specification are subject to change without prior notice; special specification can be made separately
Standard Accessories:
1. X Axis Ball Screw Drive or Double Helical Gear Syatem
2. Y Axis Bal Screw
3. Y Axis Flexible Dust Cover
4. Y Axis Wire Guiding Chain
5. X Axis Lubrication
6. Centralized Lubrication System
7. Foundation Bolt
8. Galvanized Telescopic Cover for X Axis
9. Hanged Control Box
10. Tool Box
11. AVR
|
Optional Accessories:
1. Linear Scale
2. 90° Angular Head
3. 90° Angular Head Catch Base
4. Air power draw bar
5. Digital Display
6. NC Control System
7. Movable Manual Pulse Generator
8. Linear Scale D.R.O.
9. Side Milling Head
|
Side Milling Head
| Spindle Motor |
HP |
10 |
| Max. Cutter Dia. |
mm |
200 |
| Spindle Taper |
N.T./B.T. |
〉 N.T. No.50 〉 B.T. No.50 |
| Spindle End O.D |
mm |
128.57 |
|