HOME > Milling Machines > Vertical Milling Machine > TOM 2VSG

Vertical Milling Machine TOM-2VSG

Description:

TOM-2VSG Step Speed Head

  • 42" X 9" TABLE.
  • 3HP MOTOR.
  • Meehanite castings.
  • Hardened & ground cross slide way and table.
  • Chrome hardened, ground quill.
  • High precision 7207 CP4 spindle bearings.
  • Turcite-B coated on the cross and longitudinal way.
  • Dovetail way-X,Y Z axis.
Model
Specification
TOM-2VSG
SPINDLE  
Spindle taper
R8(NST30)
Spindle speeds
60-4200 RPM
(Variable)
Quill diameter
Ø85.725mm(3.37")
Quill travel
127mm(5")
Quill feeds
0.04mm(0.0015")
0.08mm(0.0030")
0.15mm(0.0060")
Head tilt
45° Forward & Back
90° Right & Left
Spindle motor
3HP
TABLE  
Table size
1067x230mm
(42"x9") Standard
1244x230mm
(49"x9") Optional
Longitudinal travel(X)
762mm(30")
914mm(36")
Cross travel(Y)
305mm(12")
Vertical trave(Z)
406mm(16")

T-solt(width x trough number x pitch)
16mmx3x64mm
RAM  
Ram travel
305mm(12")
Machine weight
1000Kgs(2200 lbs)
Machine dimension(L x W x H)
1600x1450x2200mm
Packing dimension
1450x1450x1900mm

*All specifications, design and characterisics show on this
catalogue are subject to change without prior notice.
TOM-2VSG  
STANDARD ACCESSORIES: OPTIONAL ACCESSORIES: .
1.One shot lubrication. 1.Clamping Kit set. 9.Y-axies square way (3HG,3VHG)
2.Draw bar. 2.6" Angle vise. 10.Coolant system.
3.Tools & tool box. 3.Horizontal and vertical rotary table. 11.Chip pan.
4.Way cover. 4.Power feed (X.Y.Z-axis). 12.Right angle attachment.
5.Operation manual. 5.R8 collet set 13.Electric control box and panel.
  6.NST #30 arbor & collet. 14.Powered table elevation.
  7.NST #40 arbor & collet. 15.Ball screw (X.Y-axis).
  8.Work lamp. 16.Digital readout system.
Privacy Policy